Concrete performed culvert pipe mould

A Concrete Drain Pipe Making Machine is a specialized equipment used in the construction industry to manufacture concrete pipes for drainage systems. This machine typically consists of a steel mold or formwork, a concrete mixer, and a hydraulic system for shaping and curing the concrete.
The process of making concrete drain pipes with this machine involves the following steps:

1. Preparation: The Concrete Pipe Mould or formwork is set up on the machine, and any necessary reinforcements, such as steel bars or wire mesh, are placed inside the mold.

2. Mixing: The concrete mixer is used to combine cement, aggregates (such as sand and gravel), water, and additives to create a consistent and workable concrete mixture.

3. Pouring: The mixed concrete is poured into the mold, ensuring that it fills the entire space and is evenly distributed.

4. Shaping: The hydraulic system of the machine applies pressure to the concrete, compacting it and shaping it into the desired pipe form. The pressure is maintained for a specific period to allow the concrete to cure and harden.

5. Demolding: Once the curing process is complete, the hydraulic system releases the pressure, and the mold is opened to remove the newly formed concrete drain pipe.

6. Finishing: The freshly demolded pipe may undergo additional processes, such as surface smoothing or reinforcement installation, depending on the specific requirements of the project.

By using a Concrete Pipe Welding Machine, construction companies can efficiently produce high-quality and standardized drain pipes, reducing manual labor and improving productivity in drainage system installations.

Product Description

 Concrete pipe mould professional manufacturer is the production of concrete and reinforced concrete drain the necessary machines, mold has a reasonable structure, easy to use, have enough strength and stiffness, safe and reliable.The mould adopts hanging roller tube are: PH tube steel, F steel socket pipe jacking steel die, tongue-and-groove Danish pipe steel, socket, tongue-and-groove small flat steel, etc.

1. Saving a great deal of steel, about 30~70% (employing cold drawn steel wire can save 30%~60%; employing high stress steel wire can save 40%~69%).

2. Crack resistance can increase about 3~5 times. 

3. Rigidity increases 1~3 times. 

4. Reducing the cost (using cold drawn steel wire can reduce 25%~40%; using high stress steel wire can reduce 12%~21%). 

5. Good durability, can delay the existence and expansion of cracks. 

6, Protect the environment on which human beings depend on for existence, and reduce the deforestation.