automatic steel wire drawing machine

A wire drawing machine is a type of machine rebar ring making machine Steel Wire Processing Machine used to reduce the diameter of a wire by pulling it through a series of dies. This process is known as wire drawing and is used to produce wire of various sizes and shapes for different applications.

The machine consists of a spool or coil of wire that is fed into the machine steel ring rolling machine. The wire is then passed through a series of dies, which are typically made of tungsten carbide or diamond. As the wire is pulled through the dies, its diameter is reduced and its length is increased.
Steel Wire Processing Machine can be either single or multiple die machines. Single die machines have one set of dies, while multiple die machines have multiple sets of dies arranged in series. Multiple die machines are capable of reducing the wire diameter more efficiently and can produce wire at a faster rate.(Steel wire processing machines are used in various industries for cutting, bending, straightening, and shaping steel wire. These machines are essential in the production of wire products such as nails, screws, springs, and wire mesh.

Some common types of steel wire processing machines include:

1. Wire straightening and cutting machines: These machines are used to straighten and cut steel wire into specific lengths. They are commonly used in the production of nails and screws.

2. Wire bending machines: These machines are used to bend steel wire into various shapes and angles. They are commonly used in the production of wire forms and springs.

3. Wire drawing machines: These machines are used to reduce the diameter of steel wire by pulling it through a series of dies. This process is used to produce fine wire for applications such as jewelry and electronics.

4. Wire mesh welding machines: These machines are used to weld steel wire together to create wire mesh panels. Wire mesh is commonly used in construction, agriculture, and industrial applications.)

Product Description

1.  Usage: This Kind of machine ( pulley or OTO type ) is an ideal equipment used to draw steel wire material of high, medium and low carbon steel , as well as copper, aluminum and alloy, the machines are applied to drawing wire in the factories and nail, screw and rivet making factories etc. 

2.  Structure: the equipment consists consist of main reduction box, die casing , wheel frame ,

Wire brace and electrical control system. The spinning drawing blocks are driven by JZT or Y series motor, with gear coupling runs changeful gears to reduce speed. The drawing blocks are vertically fixed in sealed box body, the gear pair is lubricated with oil.
In order to lower residual heat on the surface of the block, the cooling means is installed in inter-wall of the block.

3. The machine runs with crawl or linkage. The safety halt gear is installed by the position of operation block.